Features and Benefits

All Bendix 4WD front pads are grooved which significantly improves performance especially when trekking off road. The groove is used to help expel any water, dust or dirt that comes into contact with the pad which becomes more prevalent when travelling off the beaten track. This means Bendix 4WD will continue to perform even under extreme conditions.

Bendix Titanium Stripe... saves you time and money.

Bendix 4WD offer quiet, confident braking performance whether it be on road cruising or extreme off road conditions.

Bendix 4WD features an exclusive Titanium Stripe providing instant friction to deliver sure stopping power without bedding in, and this means instant friction and positive pedal feel the moment your customers drive out of the workshop.

The high friction titanium coating on the brake pad surface mates quickly to the rotor when brakes are first applied and full braking performance is achieved in a few stops.  Normal bedding-in procedure is a minimum of 30 stops – that’s 10 minutes of your time that could be better spent on other jobs!

Bedding-In Graphs

Features Benefits
(EPR) Epoxy-modified phenolic resins Increased material strength under extreme conditions. Increased heat resistance at high temperatures
Titanium Stripe No bedding-in required meaning less down time and improved customer satisfaction. Instant pedal feel from the first stop
Application specific material designed for 4WD vehicles Material is matched to the vehicle type so no matter what you drive - a smaller SUV (Nissan X-trail) or a heavier 4WD (Toyota LandCruiser), you are getting optimum performance
All product gasketed Decreases the likelihood of noise
All front pads grooved Dissipates dirt, dust and water meaning the pads will work to maximum capability on or off the road
Wide Range More than 100 references available covering the majority of compact, medium, large and luxury 4WD vehicles
Premium Quality Product to protect new vehicle warranty* Fitting this product does not void your new car warranty*
* "If a part is non-genuine, but is interchangeable with the genuine part, it could be seen as being fit or appropriate for the purpose and would therefore not void the manufacturer's warranty." Source: Australian Competition & Consumer Commission (ACCC) ruling published in Consumer Express publication, April 2005, Issue 1445-9671